Description

Brand: Jinan Minrry/ PValley

Model: CS12L70

Country of Origin: China

Manufacture: China/ Bangladesh

Features:

• Should allow users to configure and download data from sensors for Real Time Monitoring of Robot Lab Condition
• Should be user friendly
• Should offer fastest data download from logger sensors
• Should allow data downloading and programing even when the logger sensor’s battery is dead
• Should allow live monitoring (temperature, relative humidity, etc.) when connected to a logger sensor
• Should be compatible with software to program the logger sensor
• RGB LED indicator for intuitive indication of the system’s function and warning
• Red LED should light up while connected to a computer and Blue LED should light up if the it tries connecting to a logger sensor
• Should not require any battery
• To be connected to a computer via a USB cable/port
• Water-resistant casing, thin and lightweight
• Should come with a 1.5 m long USB cable that to be used to connect it with a computer
• It should connect with the logger sensor using the USB-C male port for faster communication

Technical Specifications:

• Operating voltage: 5V (DC)
• Operating temperature: 0 to 85°C
• Casing material: Aluminium
• Data download speed: 10,000 data points/6 seconds
• Should be supplied with printed operation manual
• Should be supplied with below Licensed Software for downloading data and programming

Features:

• Licensed software to interface with logger sensors for downloading data and programming
• User can use it to set time, (high/low) alarms, logging start/end times, logging intervals, and live monitoring of temperature, relative humidity, etc.
• Should allow users to program Logger sensor and download & analyze logged data
• It also should allow live-streaming of measurements on the software interface
• Should be available for Windows and Mac operating systems (Windows version should be supplied)
• Software user interface should be divided into minimum five sections – Device information & status, set up time, logging options, alarm status, and checking & analyzing data
• Device information and status: It should show Connectivity status, Device model, Device type, Main battery voltage, Erase or reset option, Data points info and Device name
• Setup Time section: It should show logger’s time, computer’s time and sync time button
• Logging option: Logging interval, set logging interval button, set start/stop option button and two drop down lists
• Alarm Status: Should show Alarm Enable/Disable check box, Temperature High & Low,
• Relative Humidity High & Low, Barometric Pressure High & Low data inputting boxes and Set alarm value button
• Checking & analyzing data: Real-time data and Logged Data function buttons
• Licensed version of the software should be supplied in a USB pen drive
• Warranty: 1 (One) year with services