Solar Power Generation Trainer

Description

Brand: PValley

Model: ZT-STS-1358

Country of Origin: China

Specification:

Body Material:

Printed Front Side Sheet

Sheet Type: Digital
Country of origin: China
Feature:

  • Sheet number 26
  • Storage Printed temperature 300°c
  • Color White/Silver

Hard Round support board or Plastic Sheet

Sheet Type: Digital
Country of origin: Pakistan
Feature:

  • Sheet thickness 10mm
  • Two-Part Combination(Transparent/white)
  • UV Printout

Safety Breaker

Brand: Hyundai
Country of origin: South Korea
Feature:

  • Human Body Sense safety
  • Current error detection range is 20mA
  • Soft tripping
  • Low noise cut off

Panel Box

Brand: Madhav Enterprise
Country of origin: Indian

Features:

  • Shape: Rectangular
  • Surface Finish: Smooth
  • High quality raw material

Best structure

Brand: Altech
Country of origin: Bangladesh
Feature:

  • Sheet thickness 5mm
  • Sheet (Silver/white)
  • Square Shape

Power Monitoring

Brand: UNI-T
Country of origin: China
Feature:

  • Self-operating voltage 12V
  • Self-Consumption Current 20mA
  • Power Nature

Use Connector

Brand: ZHT
Country of origin: China
Feature:

  • Banana Female Connector Diameter 13mm
  • Banana Male Connector Diameter 4.5mm

Working area:

  • Working area: 30 * 24 inch

Features:

  • Solar Cell Base:
  • Solar Cell Modules
  1. 4 pcs of monocrystalline silicon solar cell (6×12) cm
  2. Each unit solar cell consists of:
    • Open circuit voltage (Voc): 0.55V
    • Short circuit current (Isc) : 2.3A
    • Load voltage (Vpm) : 0.5V
    • Load current (Ipm) : 2.2A
    • Power (Ppm) : 1.1W
    • Efficiency (Eff): 15%
  • Dimme
    • Adjust the brightness of halogen lamp: Input voltage-110V AC or 220V AC, Output voltage-12V
  • Light Source
    • Halogen lamp: 12V/50W
    • Beam angle: 60
  • Solar Cell Module:
  1. Digital Multimeter x 2
    • (a) DC voltage:400mV, 4V, 40V, auto range
      Input resistance ≥ 10M
    • (b) AC voltage:400mV, 4V, 40V, auto range
      input resistance ≥ 10MΩ
    • (c) DC current:400μA, 400mA, 10A, push button selector switch
      10A range: 10A fuse protected
      mA/μA ranges: 0.5A fuse protected
    • (d) AC current:400μA, 400mA, 10A, push button selector switch
      10A range: 250V/10A fuse protected
      mA/μA ranges: 250V/0.5A fuse protected
    • (e) Resistance: 400Ω, 4K , 40K , 400K 4M , 40M , auto range
    • (f) Diode test: 0~1.5V
    • (g) Continuity: buzzer for the measured resistance < 30
    • (h) Display: 3 ¾ digit LCD, Max. indication 3999
  1. Energy Storage
  • NiMH rechargeable battery: 1.2V/80mAh
  • Super capacitor: 10F/2.7V
  1. Load
  • DC motor: 0.5V~6V,10mA
  • Light bulb: 1.1V, 300mA
  • Potentiometer: 100Ω, 10-turn
  1. Inverter
  • Input voltage: 2V DC
  • Output: Modified sine wave: 1Vpp 50 /60Hz, Square wave: 2Vpp 50Hz/60Hz
  • The solar panel and storage battery is connected to a digital charge controller, which is designed with data acquisition and software monitoring function that allows the output from the solar panel and battery state to be investigated, as well as controlling the output load

Accessories:

  • Power Cord: 01 set
  • Connecting Wire & Cable
  • Complete 5 days Training Included
  • User Manual or User Guide

Protection:

Under voltage, Supply over voltage, Drive overload, Ground fault, etc.

Reviews

There are no reviews yet.

Be the first to review “Solar Power Generation Trainer”

Your email address will not be published. Required fields are marked *