Description

Brand: PValley

Model: AMT-652U3

Country of Origin: Bangladesh

Features:

• Best type Printed Sheet
• Hard Round support board or Plastic Sheet
• Safety Breaker.
• Protection System
• Panel Box
• Best structure.
• Power Monitoring
• Use Connector Working area:
• Support System: Windows XP / Win 7 / Win 8 / Win 10 / Win 11/ Linux
• Working area: 22.86 *20.32*4 cm
• Frame size: 76.2 * 62.23 *4 cm 7 Arduino UNO Unit: Microcontroller: ATmega328P – 8 bit AVR family microcontroller
• Operating Voltage :5V
• Recommended Input Voltage :7-12V
• Input Voltage Limits :6-20V
• Analog Input Pins :6 (A0 – A5)
• Digital I/O Pins :14 (Out of which 6 provide PWM output)
• DC Current on I/O Pins :40 mA
• DC Current on 3.3V Pin :50 mA
• Flash Memory :32 KB (0.5 KB is used for Bootloader)
• SRAM :2 KB
• EEPROM :1 KB
• Frequency (Clock Speed) :16 MHz ARDUINO PRO MINI Unit:
• Microcontroller: Atmega 328p – 8 BIT AVR controller
• Operating Voltage :5V and 3.3V
• Raw Voltage input :5V to 12V
• Maximum current through each I/O pin :40mA
• Maximum total current drawn from chip :200mA
• Flash Memory :32KBytes
• EEPROM :1KByte
• Internal RAM :2Kbytes
• Clock Frequency :3.3V — 8Mhz :5V — 16Mhz
• Operating Temperature: -40ºC to +105ºC Arduino Nano Unit:
• Microcontroller :ATmega328P – 8-bit AVR family microcontroller
• Operating Voltage :5V
• Recommended Input Voltage for Vin pin :7-12V
• Analog Input Pins :6 (A0 – A5)
• Digital I/O Pins :14 (Out of which 6 provide PWM output)
• DC Current on I/O Pins :40 mA
• DC Current on 3.3V Pin :50 mA
• Flash Memory :32 KB (2 KB is used for Bootloader)
• SRAM :2 KB
• EEPROM :1 KB
• Frequency (Clock Speed) :16 MHz
• Communication :IIC, SPI, USART Arduino Mega Unit:
• 86 programmable IO lines
• Two 8-bit timer/counters, four 16-bit timer/counters
• 16-channel 10-bit ADC
• Four USART
• SPI serial interface
• On-chip analog comparator NodeMCU ESP8266 Unit:
• Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
• Operating Voltage: 3.3V
• Input Voltage: 7-12V
• Digital I/O Pins (DIO): 16
• Analog Input Pins (ADC): 1
• UARTs: 1
• SPIs: 1
• I2Cs: 1
• Flash Memory: 4 MB
• SRAM: 64 KB
• Clock Speed: 80 MHz
• USB-TTL based on CP2102 is included onboard, Enabling Plug n Play
• PCB Antenna
• Small Sized module to fit smartly inside your IoT projects Arduino Micro Unit:
• 86 programmable IO lines
• Two 8-bit timer/counters, four 16-bit timer/counters
• 16-channel 10-bit ADC
• Four USART
• SPI serial interface
• On-chip analog comparator Node MCU ESP32 Unit:
• Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
• Operating Voltage: 3.3V
• Input Voltage: 7-12V
• Digital I/O Pins (DIO): 16
• Analog Input Pins (ADC): 1
• UARTs:1
• SPIs: 1
• I2Cs: 1
• Flash Memory: 4 MB
• SRAM: 64 KB
• Clock Speed: 80 MHz
• USB-TTL based on CP2102 is included onboard, Enabling Plug n Play
• PCB Antenna
• Small Sized module to fit smartly inside your IoT projects 8 Node MCU ESP-01/LORA Unit:
• Microcontroller: Tensilica 32-bit RISC CPU Xtensa LX106
• Operating Voltage: 3.3V
• Input Voltage: 7-12V
• Digital I/O Pins (DIO): 16
• Analog Input Pins (ADC): 1
• UARTs: 1
• SPIs: 1
• I2Cs: 1
• Flash Memory: 4 MB
• SRAM: 64 KB
• Clock Speed: 80 MHz
• USB-TTL based on CP2102 is included onboard, Enabling Plug n Play
• PCB Antenna
• Small Sized module to fit smartly inside your IoT projects Additional Modules Unit:
• 2 inch 7 Segment LED Display
• 8*8 Dot matrix • keyboard interface
• 32 pin I/O line interface
• On board Driver L293 of DC motor interface
• Stepper Motor Driver
• LCD 2×16 interface board (optional)
• LED Bar graph 10
• Interrupt and reset futures
• Built In-Power supply 5V/5A (AC 220V)
• Included Timer Module
• Serial Controller Connected
• Direct I/O to PC interface with USB
• I2C communication
• Pulse with Modulation
• ADC with 16-bit resolution
• RTC(DS3231) with temperature module
• GSM SIM800L with Buck Module
• Multiplexing 7Seg 4digit
• Wireless Experiment (NRF, Bluetooth, MCU-ESP)
• Ultrasonic Module interface
• RF433MHz transceiver
• 2Channel Electromagnetic switch module
• Infrared Communication Module
• Signal switch module (PNP & NPN)
• Comparator experiment module
• Built Programmer/Burner
• High current switch module using ULN series FT232RL USB TO TTL Converter/Programmer Unit:
• Operating Voltage: 5V/3.3V DC
• Max Current Draw: 5V – 500mA; 3.3V – 50mA
• Connector: Mini USB
• Fully integrated 1024bit EEPROM storing device descriptors and CBUS I/O configuration
• Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels
• 128 byte receive buffer and 256 bytes transmit buffer
• Transmit and receive LED drive signals
• Fully integrated clock generation with no external crystal required